Work Page 11-26
Orpheum No 1 Tango Banjo

Here they would be called TANGO banjos.
I have never seen an ad that showed the 4 string version
Some call them Melody Banjos, to each  heir own.
Rettberg & Lange - NYC
Circa early 1900's
 
14-1/4" scale
10-1/8" head
Friction pegs
Fiberskyn head
Modern "No Knot" tailpiece

Modern 3 foot Grover bridge, 5/8"
VG example with OHSC
Replace 3 frets in the 1st position
Oil fingerboard
Clean/Polish Wax rim assembly
Setup GDAE on light gauge strings
Will replace 3 frets, seal inlay, no filler.
1.5 mm nickel silver is close match.
Will oil the board next.
Going back together.
Changing tailpiece bolt.
The other 4 will go home in the case.
Yoke and wedges loose.
Extension Droop, no big deal.
Took a hit by tailpiece in it's life.
All tightened, cleaned,waxed.
All snugged up properly.
Strings of choice for these in my shop.
Always use proper head to tighten button screws.
Good contact and neck angle-bonus.
I am changing the bridge, and replacing it with an original Orpheum bridge from this era. I saw it only once long ago in some distributor magazine of the era.

I have had this 20 yrs at least and I made a new ebony top for it, for this application.
 I always wanted it to have a good home and this is where I decided it would live.

It is very thin and delicate and imparts a clear tone with the Fiberskyn head.
So at long last...Adieu! 
I will let it settle in now.
Final pics coming soon