Cleaned, tuner batts. replaced.

After glue-clamp-cure

Filled, not to repair bad peg hole drill-outs.

Fade to hide break, adding clear coats.

Added a 2nd backplate to take up slack.

No signs of issues.

Bottom of the Super is different than Silver Bell

head was still good, re-used.

Channel cut for reinforcement

Adding dye

Choosing a bridge.

I will replace missing binding

Finish removal from peg head.

Solid rod, 1/16, arched and pressed to go into drill-outs on each end.

Same amber patina applied.

Strung to pitch, settling in.